Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Conroe?
Replacing one torsion spring in Conroe typically costs $180 – $340, including the spring, labor, and tensioning. Most doors carry two springs, and when one breaks the other is usually the same age, so a matched pair runs about twice that, roughly $360 – $680. The written estimate sets the final price, and estimates are free.
We’re Conroe Garage Door Repair Pros, and springs are one of four things we do: Conroe garage door repair, opener repair, new door installation, and spring replacement. That’s the whole list. Springs sit at the top of the list for a reason. A torsion spring holds hundreds of pounds of lift tension, and it’s the component most likely to put a door out of service with no warning. If yours just let go, you already know the sound.
Key Takeaways
- One spring: $180 – $340. A matched pair: about $360 – $680.
- Most Conroe doors with two springs get both replaced, because they wear at the same rate.
- Spring type, door weight, and how the spring is mounted move the price more than anything else.
- Our technicians have up to 12 years of experience, and springs are work we do every week, not occasionally.
- Estimates are free. Call (877) 362-9173. We answer 24/7.
Spring Replacement Cost Breakdown (2026)
Here’s how spring work in Conroe breaks down by line item. These are typical estimated ranges for the Conroe market in 2026. Your written estimate sets the final price.
| Item | Typical Estimated Range | Notes |
|---|---|---|
| Single torsion spring replacement | $180 – $340 | One spring only. Matched pairs run about double. |
| Matched pair, both springs | $360 – $680 | Recommended when both springs are the same age. |
| Cable repair (if frayed alongside the spring) | $130 – $250 | Cables often age out with the springs. |
| Roller replacement (noisy or seized rollers) | $110 – $220 | Worth doing at the same visit if they’re worn. |
| Track realignment | $120 – $240 | Only if the door ran crooked after the spring broke. |
| Panel replacement (if a panel cracked) | $250 – $500 | A snapped spring can drop the door hard onto a panel. |
| Opener repair (if the opener took the strain) | $120 – $320 | The motor pulls against a dead door and can strip the gear. |
Two things drive that spread more than anything else. First, spring type: standard torsion springs sit at the top of the door, and some heavier doors use extension springs along the tracks. Both are workable, but torsion is the more involved job. Second, door weight. A single-car door with a light aluminum skin loads its springs differently than a double-car door with insulated steel panels, and the spring has to be matched to that load exactly. Getting that match right is most of the skill in the job.
The spring itself is a small part of the cost. Labor, tensioning, and the balancing check are the bulk of it. A door that gets a new spring but no balancing check will usually come back with a sagging panel or a strained opener within a season, so we test and adjust the balance as part of the job, not as an add-on.
What Affects Spring Replacement Pricing in Conroe
- Spring type and size. Torsion springs are priced differently from extension springs, and a heavier door needs a heavier spring. The size is stamped on the old spring, which is why we check it before quoting rather than after.
- One spring or two. This is the single biggest price swing. If your door has two springs and one has broken, the second is on borrowed time. Replacing both now costs roughly double, but doing them one at a time costs more than double over the long run.
- Door weight and construction. Conroe has a lot of newer subdivision housing with double-car insulated doors, and those carry more weight than the older single-car doors closer to downtown. Heavier door, heavier spring, more tension to set correctly.
- What broke with it. A spring rarely fails cleanly. When it snaps, the door drops, and the fall can bend a track, crack a bottom panel, or strain the opener. Each of those is a separate line item, and we check for all of them on the visit.
- Access and clearance. A low-clearance ceiling or a lot of stored items stacked against the tracks slows the work down. We’ll tell you what needs moving before we start.
- Brand and hardware. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems specifically, so standard residential hardware from those lines is straightforward. Uncommon or improvised mounting takes longer.
Conroe’s climate plays a smaller role than most homeowners expect. Our summers are long and hot, and the garage gets hotter than the house does, but heat isn’t what kills a spring. Cycles kill springs. A door that cycles four times a day wears its springs out far faster than one that cycles twice, and the average spring is rated for a set number of cycles regardless of how old the door is. That’s why two doors of the same age in the same neighborhood can need springs years apart. The house with the kids and the two cars cycling in and out all day gets there first.
If you’re weighing spring work against a wider problem, our Conroe garage door repair page covers how spring failures fit into the broader repair picture.
Can You Replace Just One Spring in Conroe?
Yes, you can replace a single spring in Conroe for $180 – $340, and we’ll do it if you ask. Whether it’s the right call depends on the age of the surviving spring. If both springs went in at the same time and one just broke, the other has used up the same number of cycles and is likely close behind. Replacing one now usually means paying for a second service call later. Replacing both now costs about twice the single-spring range, once.
A failing spring doesn’t always announce itself with a bang. Some just lose tension slowly, and the first sign is a door that feels heavier than it used to or won’t stay open halfway. If that sounds familiar, it’s worth having it checked before it lets go completely. Call (877) 362-9173 for a free estimate.
How to Save on Spring Replacement
Spring pricing in Conroe is fairly tight because the parts are standard and the labor is fixed by the job, not the hour. Still, there are real ways to keep the total down.
- Replace both springs at once. It sounds like the opposite of saving, but two springs in one visit costs less than two separate visits, and you avoid a second service call when the second spring goes.
- Bundle worn parts into the same visit. If your rollers are noisy or a cable is frayed, add them to the spring job. Rollers run $110 – $220 and cable repair $130 – $250, and doing them alongside the spring avoids paying for a separate visit later.
- Get the balance checked, not just the spring swapped. An unbalanced door puts extra strain on the opener and the springs, which shortens their life. We adjust the balance as part of the spring job.
- Don’t wait for the door to break. A door that feels heavy or runs unevenly is telling you something. A check before the failure costs less than repairs after it.
- Get a written estimate before work starts. Ours are free, and the estimate spells out parts and labor line by line so there are no surprises. Call (877) 362-9173.
One more saving that’s easy to overlook: maintaining the door’s balance and lubrication between spring jobs. A door that runs smoothly cycles its springs at the designed rate instead of fighting friction. It doesn’t make springs last forever, but it does help them last the cycles they’re rated for.
Is Spring Replacement a DIY Job?
No. Torsion spring replacement is not a DIY repair in Conroe or anywhere else, and a trained technician should do it. The spring stores enough energy to cause serious injury if it’s released without the right tools and technique, and the winding bars and procedures used to set tension aren’t things a homeowner should improvise with a socket set. Extension springs carry the same risk in a different direction and need safety cables to contain them if they fail.
We mention this not to scare you off a repair but because springs are the one garage door job where the stakes are genuinely high. We do this work because we’re equipped for it, trained for it, and set up for the specific tools it takes. The safest DIY approach is to leave the spring alone and have someone who does it every day handle it.
Why Choose Conroe Garage Door Repair Pros for Spring Work?
We’re a single-trade shop. Every technician on every job is a garage door professional, not a generalist splitting time between doors and plumbing. That focus matters on springs, which are the highest-risk repair in the trade and the one a lot of companies won’t advertise. We list it as a named service because it’s core work for us, not a job we take and subcontract out.
Our technicians are factory-familiar with eight brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. If your door or opener is one of those, we know the hardware and we’re not guessing at it. For openers, that includes the current Wi-Fi and smart-home models from LiftMaster, Chamberlain, and Genie, where a dead spring can strain the motor and strip the gear before you notice a problem. Opener repair is its own specialty for us, not an afterthought.
One call covers the whole arc: repair, opener, spring, or full replacement. If the spring job turns into something bigger, you won’t need to hunt down a second company. Our technicians have up to 12 years of experience, and we check the door’s balance and inspect the cables, rollers, and tracks on every spring visit. The written estimate sets the final price, and it’s free to get one.
We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday. If your spring fails on a Saturday, call and we’ll book you for Sunday. For related repairs, take a look at our guide to garage door repair in Conroe.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Conroe?
One spring runs $180 – $340 in Conroe, and a matched pair runs about twice that, $360 – $680. The written estimate sets the final price. Call (877) 362-9173 for a free estimate.
Do I need both springs replaced if only one broke?
Usually yes, and it typically costs $360 – $680 to replace a matched pair. The second spring is the same age and has used the same cycles as the one that failed, so it’s likely to go next. Replacing both in one visit costs less than two separate repairs. Call (877) 362-9173 and we’ll tell you the age that matters here.
Can you replace a broken spring today?
Often yes, depending on the part. Spring replacement is a same-day job in most cases, and we book it into the next opening. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (877) 362-9173 for a free estimate.
How long do garage door springs last?
Springs are rated by cycles, not years, and a heavily used door can wear out its springs well before a lightly used one in the same neighborhood. Watch for a door that’s suddenly heavier or an opener that seems to strain. Call (877) 362-9173 and we’ll check the springs, cables, and balance together.
Is it cheaper to repair the springs or replace the whole door?
Repair, in most cases: spring replacement at $180 – $340 for one or $360 – $680 for a pair costs far less than a new door at $700 – $2,200. Replacing the door makes sense when panels are badly damaged or the door is past saving. Our spring replacement page walks through the decision. Call (877) 362-9173 for a free estimate.
Free Spring Replacement Estimates in Conroe
If your door’s spring has let go, don’t force it open and close by hand to get the car out. A door with a broken spring is unbalanced and heavy, and the opener will strain or strip trying to lift it. Call us first. Estimates are free, the written quote sets the final price, and we’ll tell you straight whether you need one spring or both.
Springs are work we do regularly, with the tools and training the job requires. That’s the difference between a repair that holds and one that comes back. Call (877) 362-9173. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Conroe market as of 2026. Conroe Garage Door Repair Pros offers free estimates – call (877) 362-9173.
Written by the team at Conroe Garage Door Repair Pros.
What Our Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Andre Prince"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Vikram Patel"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Claudia Herrera